The CleanEx range of ultrasonic cleaners are portable benchtop machines designed for cleaning small items such as jewellery, laboratory, dental and medical equipment.

• Tank capacities between 4 to 28 litres.
• Constructed entirely of stainless steel (AISI 304).
• Adjustment of the cleaning time & water temperature.
• xx02 and xx12 models have a ultrasonic power adjustment feature: 50%, 75%, & 100%.
• High efficiency piezoelectric ultrasonic transducers with special ceramics.
• Drainage valve (except for cleanEX-4XX models).

The CleanEx-N single stage benchtop ultrasonic cleaners are designed for use in industries where heavy duty demands and performance are required. Available with a number of different optional accessories ranging from pump filtration to an oil separator, this gives the CleanEx-N range more versatility to meet the cleaning demands in many industrial sectors.

• • Tank capacities between 10 to 80 litres.
• • Constructed entirely of stainless steel (AISI 304).
• • Tank construction available in AISI 316L or AISI 316Ti.
• • Automatic shut of heaters at low water level.
• • Adjustment of the cleaning time & water temperature.
• • xx02 and xx12 models have a ultrasonic power adjustment feature: 50%, 75%, & 100%.
• • High efficiency piezoelectric ultrasonic transducers with special ceramics.
• • Drainage valve.

AutoClean ultrasonic cleaning systems, specifically designed for the high and precision cleaning demands of transportation industries such as the aviation, naval, railway and even the engine remanufacturing and repair industries. The AutoClean range has been designed with engine components in mind, cleaning all types of parts from cylinder heads, injectors, engine blocks, brake discs, gearboxes and radiators could all benefit.

The AutoClean’s cleaning ability is 16 times more effective than conventional hand washing and with the use of ultrasonic cleaning power this enables you to reach the smallest holes and compartments effectively, meaning cleaning those hard to reach places has never been easier.

• Tank capacities between 200 to 9,000 litres.
• 28kHz standard ultrasonic frequency. 40kHz with sweep generator option available.
• Constructed entirely of stainless steel (AISI 304).
• Tank construction available in AISI 316L or AISI 316Ti.
• Automatic shut of heaters at low water level.
• Available with vacuum drying option.
• Adjustment of the cleaning time & water temperature.
• Tailor made design with a large range of optional extras.

The CleanMax range of industrial sized single staged ultrasonic cleaners are designed to be used in industrial applications where heavy duty cleaning demands and performance are widely required. Due to mobile design the CleanMax range are mainly used for maintenance in the medical, laboratory and health industries where precise cleaning and mobility are essential needs.

• Tank capacities between 40 to 160 litres.
• Constructed entirely of stainless steel (AISI 304).
• Tank construction available in AISI 316L or AISI 316Ti.
• Automatic shut of heaters at low water level.
• Adjustment of the cleaning time & water temperature.
• xx02 and xx12 models have a ultrasonic power adjustment feature: 50%, 75%, & 100%.
• High efficiency piezoelectric ultrasonic transducers with special ceramics.
• Drainage valve.

The CleanMax-N range of industrial sized single staged ultrasonic cleaners are designed to be used in industrial applications where heavy duty cleaning demands and performance are widely required. The CleanMax-N range are widely used for cleaning parts in the automotive, aviation, metal ware and many other industries where precise parts cleaning is essential prior to surface treatment or final assembly. The CleanMax-N range also offers a large amount of optional accessories ranging from pump filtration systems, oil separators, circulation pumps, weir systems and many more.

• Tank capacities between 40 to 240 litres.
• Constructed entirely of stainless steel (AISI 304).
• Tank construction available in AISI 316L or AISI 316Ti.
• Automatic shut of heaters at low water level.
• Adjustment of the cleaning time & water temperature.
• xx02 and xx12 models have a ultrasonic power adjustment feature: 50%, 75%, & 100%.
• High efficiency piezoelectric ultrasonic transducers with special ceramics.
• Drainage valve.

The MobilClean range offers the ultimate in system flexibility for ultrasonic cleaning as the hermetically sealed modular stainless steel units can be incorporated into newly designed systems or retrofitted into existing systems to provide ultrasonic cleaning capability.

• Frequency: 28kHz.
• Ultrasonic Transducer boxes constructed of heavy gauge stainless steel to extend operational life (AISI 316L or AISI 316Ti).
• High efficiency piezoelectric ultrasonic transducers with special ceramics.
• Available with bottom/side mount fixtures or with a hanging hook placed over the tank wall.
• Optional power adjustment feature (50%, 75%, 100%).

MobileClean-N immersible type of modules offer a full range of features to meet any precision cleaning requirements found within many industries. The high frequency generators with a high efficiency circuits are designed for lower energy consumption and provides an unprecedented high precision cleaning performance.

• Frequency: 28kHz or 40kHz.
• Ultrasonic Transducer boxes constructed of heavy gauge stainless steel to extend operational life (AISI 316L or AISI 316Ti).
• High efficiency piezoelectric ultrasonic transducers with special ceramics. - Available with bottom/side mount fixtures or with a hanging hook placed over the tank wall.
• Overload protection, thermal switch and over current protection circuit.
• Power adjustment feature (10%-100%).

MultiClean cleaning systems are available with 2, 3, 4 or 5 tanks from our standard range as well as larger quantities for special machines at request. Tanks can included multiple configurations including pre-washing, ultrasonic cleaning, rinsing, passivation and drying.

Pre-Washing

Pre-washing is generally used for very dirty and greasy parts before precise cleaning to remove rough contamination to save time, energy, water and cleaning chemical consumption.

Ultrasonic Cleaning

Ultrasonic cleaning power is able to reach points that are normally very difficult to reach like small holes and complicated shaped parts which can’t be cleaned with a brush or by hand giving better precision cleaning results.

Rinsing

Cleaning chemical residue can remain on the surface of the parts after cleaning. To wash away these chemical residuals rinsing can be used either by a closed circulation system or by continual fresh water supply.

Passivation

Sometimes cleaned parts needed to be protected against oxidation and by adding an additional stage with a passivation chemical inside the tank you can passivate and protect the parts

Drying

After the cleaning process is complete parts can be dried by either hot air or vacuum drying as the final stage according to the geometry of the parts and to customer’s requirements.

Optional Extras

A large range of optional extras are available including oil skimmers, pump circulation, filtration, basket handling systems, pneumatic lids and many more available at request.

ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features.

• Top opening gas spring assisted machine lid.
• Motorised stainless steel component basket.
• Stainless steel spray bar assemblies above, below and at the side.
• Integral fluid filtration system.
• Basket jog feature.
• Chemical & corrosion resistant stainless steel pump.
• Electrical powered fluid heating.

SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more.

• Pneumatically powered vertical opening front access door.
• Heavy duty stainless steel mesh motor driven component basket.
• Integral fluid filtration system.
• Corrosion resistant spray jets.
• Chemical & corrosion resistant stainless steel pump.
• Microprocessor or PLC controlled.
• Electrical powered fluid heating.
• Optional double skinned fluid tanks with 20mm thick insulation.

TunClean washing systems are best suited for cleaning parts with a simple basic shape (flat surfaces, without blind holes) where accurate positioning in the active areas is not so necessary. TunClean machines can include pre-washing with spraying water plus a chemical detergent, washing with spraying water plus a chemical detergent, rinsing with spraying water and drying with hot air. The design, configuration and number of washing stages in the tunnel can be customized to suit to customer’s exact specifications and requirements. In the case of a tunnel with a conveyor belt, the components are loaded on to a conveyor (mesh or bars type) which conveys the pieces through the different steps of the cleaning process. The pieces are generally conveyed on a line conveyor system and the speed of conveyor can be adjusted by the machine operator.

Operating Details

In TunClean systems the pieces are automatically transferred from stages to stage by a conveyor which passes through a tunnel until the cleaning process is completed. Generally pieces are first transferred to the washing section, once washing is completed the pieces are transferred to the rinsing section to remove the remaining chemical detergent residues that was used in the washing section. Transfer to the drying unit will usually follow to dry the remaining water from the pieces with hot air. Any combination of processes can be included to suit your needs. A number of optional accessories can also be included which include filtration and oil separators and many more.

Automation of the cleaning process reduces the running costs on multistage systems by assuring consistent, repeatable quality, reducing reject rates, labour costs and increasing throughput. With automatic handling systems further cost reductions can result from controlling speed of basket entry and withdrawal from the tanks.

• Adjustable dripping time between tanks.
• Reduced running costs.
• Easy to use and program.
• Password protected to prevent unauthorised program access.
• Touch sensitive LCD operation panel for functional programming and display.
• Positional accuracy between +/- 1mm provided by servo motors with built-in positional encoders.
• Loading/Unloading positions with basket detection sensors for fully automatic control.
• PLC control panel to control the robot as well as all other process (heaters, ultrasonic cleaning time, drying time, filtration and so on.)

In this type of system the basket transfer is completed by electrical crane from tank to tank. Generally this system is used for high volume tank capacities, long process times and for the transferring of heavy parts. The price for this system is more cost effective against the fully automatic handling systems. The system is controlled with a manual remote control device held by the operator. The maximum handling weight for this system is up to 5 metric tons.

Pneumatic handling systems are our newly designed type of handling systems. The vertical movement is controlled via a button on the control arm of the robot which works with pneumatic piston. The Horizontal movement is completed manually by the operator by hand. There are bearings on the horizontal beam to assist the operator in moving the parts/basket easily and very smoothly by hand. Utilising compressed air for lifting of the parts/basket, this easy lift system is a significant contributor to the operator’s health.

Special talior made project machines are prepared together with our customers when a special non-standard design is required. Technical manufacturing drawings are prepared with the use of 3D CAD software Solidworks program. Drawings are then sent to the customer before production begins for final technical approval. During the manufacturing of the machinery customers are invited to our factory once their orders are complete to inspect the machinery before shipment. Our expert mechanical and electrical technician personnel will do the installation of the machine.

ComboClean systems have been specifically designed to meet the high and precision batch cleaning demands of small massed produced parts. The cleaning process works by placing contaminated parts inside a special basket which then rotates within the specially designed cleaning chamber. The basket rotation feature allows for the contaminated parts to be cleaned with both pressurised aqueous cleaning fluid as well as providing agitation during both the spray washing and flood washing stages as the chamber is filled with cleaning fluid. Ultrasonic cleaning capability can also be added to the ComboClean washing chamber with the use of ultrasonic rod transducers. As the whole cleaning process is complete within the single wash chamber there is no need to remove the basket between stages to different locations making the ComboClean an extremely efficient and versatile cleaning machine.

• Machine constructed entirely of stainless steel.
• Standard configurations offer washing, rinsing & drying.
• Additional passivation or additional rinsing available.
• Optional ultrasonic washing capability.
• Fine particle filtration through Cartridge & bag filtration.
• Available with vacuum drying option.
• Available with manual & automatic basket loading.
• Basket rotation aides cleaning & drying effectiveness.
• Integrated tank flow filtration.
• Optional oil separators options.
• Siemens PLC control system for programming and error diagnosis.
• Closed system housing with maintenance doors for optimum access & compact design.